|
Easy to use, the kit also includes detailed instructions. Replacement pads and additional powders are also available.
CONTENTS
- Felt polishing pad mounted on a backing disc.
- Bag of cerium polishing powder.
- Marking crayon to mark the inside of the glass (to act as a guide when polishing)
- Cleaning cloth to wipe and allow inspection of the work area.
- Detailed instructions and a self-sealing bag to permit storage for future use.
ALL YOU NEED TO PROVIDE:
Low speed drill ( max 1500 rpm) Container to mix powder with water.
APPLICATION TIPS
- Mix 3 parts water with 1 part powder in a container.
- Place pad into mixture and leave for 5 minutes.
- Clean glass to remove all traces of dirt.
- Mark the inside of the glass with a line either side the area to be worked.
- Mount pad in the drill and apply to work area.
- Move pad up and down, left and right in work area.
- Keep the surface wet to prevent glass getting hot.
- Wipe off residue and inspect quality of repair.
- Wash and store pad for later use.
UK MAINLAND DELIVERY ONLY
|